Back to top

2020 Custom Line 50M DRD

Istanbul, Turkey

£17,000,000

External Hull
The construction is completely finished, examinations, tests done and approved by the classification society.
Sandblasting, fairing and base coat painting is finished in all areas both in hull and superstructure. Top coat
painting is finished except aft hull and garage door area. It is around %2.5 of all top coat painting job. Fairing
and base coat paint system is Stopani, Top coat paint system is Awlgrip.
Antifouling paint system is International Micron Extra, 4 layers are applied, 5 layers will be applied till the
launching.
Hull is protected with Cathelco ICCP and Antifouling System. Hull parts are mounted. Electrical cabling and
connections started and %25 finished.
Grounding plates (Dynaplate) mounted and connected to systems and lightning rod. Mounted in watertight
boxes to prevent ingress of water.
Sea Chest are finished, fittings, butterfly valves are mounted, equipped with a grill.
Anchor pocket in manufactured from 316L stainless steel and mounted. Polishing is done.
Portlights are manufactured from 316L stainless steel according to RINA Approved project. Glazing is done
and 24 of 25 portlights are mounted.
Transom door is manufactured, fairing done, not painted. Power unit, cylinders, pistons mounted, hydraulic
piping is done. Cabling started. Total progress in this item is %60
There are 24pcs of underwater lights (make Ocean LED) arranged. 12 of them are mounted, 12 is waiting.
Cabling started . Total progress is %50
All overboard discharge and intakes are mounted and equipped with class certificated valves (make Ayvaz
or Soyvalve)
Bow thruster tunnel is finished and equipped with a grill, electrical bow thruster mounted (make TRAC
96kW). Cabling is finished %90.
Shaft and propeller is mounted, alignment is done, chockfast applied. Maker of shaft and propeller is Eliche
Radice.
Rudder system and rudder blade is manufactured and mounted. Shafting is local made with certificated
material, rudder blade is manufactured in the shipyard, pressure test is done, and filled and drained with
paint to prevent corrosion inside.
Harken external access system is mounted over glazing at hull sides and over glazing of upper deck sides.
Shore connection cable access box is ready. The cover of the box is manufactured but not mounted. Cover
of the gangway box is manufactured, but not mounted also.
Stabilizer fins will be mounted before launching.

 

For more information, please contact Bayram ÇEBİ

+90 532 727 60 61 Ι bayram@cebiyacht.com

Disclaimer

Approved Boats is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Cebi Yachts.

Basic Boat Info

Make: Custom Line
Model: 50M DRD
Year: 2020
Condition: New
Category: Power
Construction: Fiberglass

Dimensions

Length: 163'9 ft / 49.90 m
Length Overall: 163'9 ft / 49.90 m
Beam: 36'1 ft / 11.00 m
Max Draft: 8'10 ft / 2.70 m
Cabins Count: 9

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Make: MTU
  • Model: 12V 2000 M72
  • Fuel: Diesel
  • Engine Power: 1,450hp
Engine #2 Specs:
  • Make: MTU
  • Model: 12V 2000 M72
  • Engine Power: 1,450hp
Total Engine Power: 2,900hp

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 95,800 L
Water Tanks: 1
Water Tank Capacity: 40,000 L

Other

Heads Count: 9
Boat Class: Motor Yachts

Contact Us