Basic Boat Info
Tax Status: Paid
Boat Name: Racoon 4
Make: Hallberg-Rassy
Model: 34
Year: 1994
Condition: Used
Category: Sail
Builder: Hallberg-Rassy
Designer: German Frers
Construction: Fiberglass
Boat Hull ID: 0000000000
Has Hull ID: Yes
Keel Type: Bulb Keel
Dimensions
Length: 33'9 ft / 10.28 m
Length Overall: 33'9 ft / 10.28 m
Beam: 11'2 ft / 3.40 m
Max Draft: 6'1 ft / 1.85 m
Min Draft: 6.07 ft
Displacement: 5,600 kg
Cabin Headroom: 6'1 ft / 1.85 m
Dry Weight: 5,300 kg
Ballast: 3,400 kg
Cabins Count: 2
Engines / Speed
Engines: 1
- Make: Volvo Penta MD 2030
- Model: Volvo Penta MD 2030
- Drive Type: SailDrive
- Fuel: Diesel
- Engine Power: 28hp
- Type: Inboard
- Propeller Type: 2 Blade, Bronze, Folding
- Year: 2000
- Engine Hours: 934
Displacement Type: Dry Load
Tanks
Fuel Tanks: 1
Fuel Tank Capacity: 155 L
Fuel Tank Material: Stainless Steel
Water Tanks: 1
Water Tank Capacity: 240 L
Water Tank Material: Stainless Steel
Other
Heads Count: 1
Drive Type: Sail
Windlass Type: Electric
Boat Class: Cruisers, Racers and Cruisers
Description fournie par le constructeur
The hull and deck of the HR 34 are built under constant supervision of the Lloyd's Register of Shipping, and a Lloyd's certificate is supplied with each boat. NGA-gelcoat and isophthalic polyester resin is used in the laminate construction of hull. The hand lay-up method provides insulation above the water line against heat and cold. Construction also includes strong floor reinforcements and a deep bilge. The boat has a very efficient bolt-on lead keel with 10 stainless steel bolts. Deck and coachroof areas, and also the cockpit, are of sandwich construction, laminated to the hull to form a one-piece construction. The large cockpit is well-protected by a windscreen made of tempered glass and a sprayhood. The middle section of the windscreen opens. In the stern is an integrated bathing platform with folding ladder. Cockpit floor and side trims are all in top quality teak. On deck the HR34 also has strong cleats forward and aft; spring cleats and fittings for spinnaker blocks; an easy-to-see compass in instrument console above sliding hatch. It has a stainless steel rudder shaft with roller bearings, and tiller steering. The rigging consists of a fractional rig by Selden with a strong backstay tensioner for trimming the mast. Running backstays are not necessary. The mainsail and working jib are made from high class material by a leading sail-maker. Halyards and lines are led into the cockpit. The interior is tastefully finished in mahogany with a matte silk varnish. There is no visible fiberglass. Detachable carpets have press studs to avoid movement, and floors are teak with inlaid holly stripes and varnished. The saloon has two sofas. The L-shaped sofa has lockers above and stowage space underneath. There is a strong saloon table, galley and a chart table with space for instruments. The forward and aft cabins both have lockers above and generous stowage below their berths.
The hull and deck of the HR 34 are built under constant supervision of the Lloyd's Register of Shipping, and a Lloyd's certificate is supplied with each boat. NGA-gelcoat and isophthalic polyester resin is used in the laminate construction of hull. The hand lay-up method provides insulation above the water line against heat and cold. Construction also includes strong floor reinforcements and a deep bilge. The boat has a very efficient bolt-on lead keel with 10 stainless steel bolts. Deck and coachroof areas, and also the cockpit, are of sandwich construction, laminated to the hull to form a one-piece construction. The large cockpit is well-protected by a windscreen made of tempered glass and a sprayhood. The middle section of the windscreen opens. In the stern is an integrated bathing platform with folding ladder. Cockpit floor and side trims are all in top quality teak. On deck the HR34 also has strong cleats forward and aft; spring cleats and fittings for spinnaker blocks; an easy-to-see compass in instrument console above sliding hatch. It has a stainless steel rudder shaft with roller bearings, and tiller steering. The rigging consists of a fractional rig by Selden with a strong backstay tensioner for trimming the mast. Running backstays are not necessary. The mainsail and working jib are made from high class material by a leading sail-maker. Halyards and lines are led into the cockpit. The interior is tastefully finished in mahogany with a matte silk varnish. There is no visible fiberglass. Detachable carpets have press studs to avoid movement, and floors are teak with inlaid holly stripes and varnished. The saloon has two sofas. The L-shaped sofa has lockers above and stowage space underneath. There is a strong saloon table, galley and a chart table with space for instruments. The forward and aft cabins both have lockers above and generous stowage below their berths.
Avis de non-responsabilité
La société offre les informations relatives à ce navire de bonne foi mais n'est pas en mesure de garantir l'exactitude de ces informations ni l'état du navire. Il revient à l'acheteur d'instruire ses agents ou ses experts afin de vérifier et de faire valider les informations de son choix. Ce navire est offert sous réserve d'une vente préalable
La société offre les informations relatives à ce navire de bonne foi mais n'est pas en mesure de garantir l'exactitude de ces informations ni l'état du navire. Il revient à l'acheteur d'instruire ses agents ou ses experts afin de vérifier et de faire valider les informations de son choix. Ce navire est offert sous réserve d'une vente préalable